Graphic Pack NVE - 🖤PureDark GTAV DLSS, DLAA, FSR Upscaler 2023! SP + FiveM

[Ferrari]

A GTA V NVIDIA NVE DLSS 3 Frame Generation mod is now available online, doubling the game's performance while bringing the most stable image yet, thanks to DLAA implementation.
The mod, which was developed by well-known modder PureDark and first showcased last month, required quite a bit of work as the game has no motion vectors in the engine and required patching hundreds of shaders to inject motion vectors. Being a game that can easily run into CPU bottlenecks, Frame Generation works wonders, as it can double its performance while providing the most stable image yet, thanks to DLAA, which is a much better AA solution than the game's built-in MSAA and TXAA.

NOTE FROM RAZED (NVE creator):

'Additionally we've partnered with @PureDark to bring DLSS / DLAA and FSR to GTAV. The DLSS / FSR plugin will fix aliasing issues and allow you to disable in-game MSAA for a significant FPS boost. It's compatible with both FiveM and Single Player.'

Be sure to carefully read the instructions inside the compressed file before installing it

- PureDark NVE GTAV DLSS, DLAA, FSR Upscaler:

You don't have permission to view content!

 

[S0Rk]

Thank you very much,
I have tested this version and have no errors, unlike the first RTX-only version.

 

[Yooza]

HOW TO : Not support AMD ?

 

[exziiR]

Write this when i enable the dlss in FiveM. Any idea for fix it?

 

[Ferrari]

Make sure you have the latest NVE installed, i.e. December 2023 to maximize compatibility. I assume it works with older versions too but I haven't tried it.

 

[quantfalt]

Make sure you have the latest NVE installed, i.e. December 2023 to maximize compatibility. I assume it works with older versions too but I haven't tried it.

broo my gta 5 not launching
how to fix it i have amd gpu

 

[gabro666]

broo my gta 5 not launching
how to fix it i have amd gpu

you have to check GTAVUpscaler.ini in mods folder and modify by selecting fsr..

 

[Yooza]

you have to check GTAVUpscaler.ini in mods folder and modify by selecting fsr..

View attachment 21446

THX

 

[Yooza]

how to setting 1920 x 1080

 

[Ferrari]

how to setting 1920 x 1080

For example, if your game resolution is 1920x1080, and you set Target Resolution Scale to 1.000, then DLSS will upscale from 1920x1080 to 1920x1080. Increase the Target Resolution Scale to the resolution you want (2.000 will be 3840x2160 (4K)). The change will appear at the bottom and done:

 

[Yooza]

For example, if your game resolution is 1920x1080, and you set Target Resolution Scale to 1.000, then DLSS will upscale from 1920x1080 to 1920x1080. Increase the Target Resolution Scale to the resolution you want (2.000 will be 3840x2160 (4K)). The change will appear at the bottom and done:

View attachment 21487​

thx

 

[quantfalt]

thnx

 

[MM234]

ive done all this but still says couldnt load gtavupscaler.asi

 

[Vac]

What settings would you recommend?

 

[Krush]

A GTA V NVIDIA NVE DLSS 3 Frame Generation mod is now available online, doubling the game's performance while bringing the most stable image yet, thanks to DLAA implementation.
The mod, which was developed by well-known modder PureDark and first showcased last month, required quite a bit of work as the game has no motion vectors in the engine and required patching hundreds of shaders to inject motion vectors. Being a game that can easily run into CPU bottlenecks, Frame Generation works wonders, as it can double its performance while providing the most stable image yet, thanks to DLAA, which is a much better AA solution than the game's built-in MSAA and TXAA.

NOTE FROM RAZED (NVE creator):

'Additionally we've partnered with @PureDark to bring DLSS / DLAA and FSR to GTAV. The DLSS / FSR plugin will fix aliasing issues and allow you to disable in-game MSAA for a significant FPS boost. It's compatible with both FiveM and Single Player.
Be sure to carefully read the instructions inside the compressed file before installing it. MSAA must be disabled in GTAV's graphics settings before you install and you must set the game to Borderless Windowed mode. Additionally you must have ReShade enabled as per the NVE readme guide.'

- PureDark NVE GTAV DLSS, DLAA, FSR Upscaler:

You don't have permission to view content!

Hello! I have a problem with loading the DLSS. It says that FiveM crashed due to a third-party plugin.

EDIT: Changed a few things because I had QuantV installed too. So now It gives me another error. (Second Image attached)

 

[jdmasf10001]

A GTA V NVIDIA NVE DLSS 3 Frame Generation mod is now available online, doubling the game's performance while bringing the most stable image yet, thanks to DLAA implementation.
The mod, which was developed by well-known modder PureDark and first showcased last month, required quite a bit of work as the game has no motion vectors in the engine and required patching hundreds of shaders to inject motion vectors. Being a game that can easily run into CPU bottlenecks, Frame Generation works wonders, as it can double its performance while providing the most stable image yet, thanks to DLAA, which is a much better AA solution than the game's built-in MSAA and TXAA.

NOTE FROM RAZED (NVE creator):

'Additionally we've partnered with @PureDark to bring DLSS / DLAA and FSR to GTAV. The DLSS / FSR plugin will fix aliasing issues and allow you to disable in-game MSAA for a significant FPS boost. It's compatible with both FiveM and Single Player.
Be sure to carefully read the instructions inside the compressed file before installing it. MSAA must be disabled in GTAV's graphics settings before you install and you must set the game to Borderless Windowed mode. Additionally you must have ReShade enabled as per the NVE readme guide.'

- PureDark NVE GTAV DLSS, DLAA, FSR Upscaler:

You don't have permission to view content!

LINK STATUS: ​

anyone try it with quantv SP instead of using nve SP? If so, did it work?

 

[incorrectman677]

A GTA V NVIDIA NVE DLSS 3 Frame Generation mod is now available online, doubling the game's performance while bringing the most stable image yet, thanks to DLAA implementation.
The mod, which was developed by well-known modder PureDark and first showcased last month, required quite a bit of work as the game has no motion vectors in the engine and required patching hundreds of shaders to inject motion vectors. Being a game that can easily run into CPU bottlenecks, Frame Generation works wonders, as it can double its performance while providing the most stable image yet, thanks to DLAA, which is a much better AA solution than the game's built-in MSAA and TXAA.

NOTE FROM RAZED (NVE creator):

'Additionally we've partnered with @PureDark to bring DLSS / DLAA and FSR to GTAV. The DLSS / FSR plugin will fix aliasing issues and allow you to disable in-game MSAA for a significant FPS boost. It's compatible with both FiveM and Single Player.
Be sure to carefully read the instructions inside the compressed file before installing it. MSAA must be disabled in GTAV's graphics settings before you install and you must set the game to Borderless Windowed mode. Additionally you must have ReShade enabled as per the NVE readme guide.'

- PureDark NVE GTAV DLSS, DLAA, FSR Upscaler:

You don't have permission to view content!

LINK STATUS: ​

Hi sir when i install this mod my gta 5 not launching

 

[HeavyR6]

Anyone know why frame gen is not showing up? I'm using a rtx 4070 (fivem)

 

[PrzemoN94]

ferraritestaroso​

Hey buddy, I did exactly everything like in installation guide (single player), and the dlss menu won't pop up, but in reshade tab called (add-ons) it shows, that it's installed with the check mark... Can u help me to fix it please?

 

[suprime]

for AMD or NVIDIA ?