Guide [Detailed Description][Tool] How to set Handling?

[ARaros]

Hello, On the FiveM platform, we will talk about vehicle handling that most people are curious about but cannot do because they do not know how to do it.

First of all, the vehicle you add must have a handling file, if there is no handling file in the vehicle, you can add it as follows

We enter the folder of a tool with any handling file and copy it.



Then we enter the folder of the tool without the handling file and paste it. Don't forget to edit the resource after pasting.


In order for Handling to be compatible with the tool, we open the file and change the sticker code in this section with the sticker code of the tool to which we want to add the handling file.






This part was to show how to add a handling file to vehicles without a handling file. Do not restart from the panel after adding the handling file, people on the server crash.

Code:
<?xml version="1.0" encoding="UTF-8"?>

<CHandlingDataMgr>
<HandlingData>



<Item type="CHandlingData">
<handlingName>pdmustang</handlingName>
<fMass value="1600.000000" />
<fInitialDragCoeff value="2.950000" />
<fPercentSubmerged value="85.000000" />
<vecCentreOfMassOffset x="0.000000" y="0.000000" z="0.000000" />
<vecInertiaMultiplier x="1.000000" y="1.300000" z="1.600000" />
<fDriveBiasFront value="0.850000" />
<nInitialDriveGears value="6" />
<fInitialDriveForce value="0.395000" />
<fDriveInertia value="1.000000" />
<fClutchChangeRateScaleUpShift value="7.200000" />
<fClutchChangeRateScaleDownShift value="7.100000" />
<fInitialDriveMaxFlatVel value="150.500000" />
<fBrakeForce value="1.900000" />
<fBrakeBiasFront value="0.650000" />
<fHandBrakeForce value="0.520000" />
<fSteeringLock value="38.800000" />
<fTractionCurveMax value="3.800000" />
<fTractionCurveMin value="3.050000" />
<fTractionCurveLateral value="22.500000" />
<fTractionSpringDeltaMax value="0.150000" />
<fLowSpeedTractionLossMult value="1.000000" />
<fCamberStiffnesss value="0.000000" />
<fTractionBiasFront value="0.490000" />
<fTractionLossMult value="1.000000" />
<fSuspensionForce value="2.500000" />
<fSuspensionCompDamp value="1.300000" />
<fSuspensionReboundDamp value="2.500000" />
<fSuspensionUpperLimit value="0.062000" />
<fSuspensionLowerLimit value="-0.100000" />
<fSuspensionRaise value="0.000000" />
<fSuspensionBiasFront value="0.500000" />
<fAntiRollBarForce value="0.600000" />
<fAntiRollBarBiasFront value="0.540000" />
<fRollCentreHeightFront value="0.390000" />
<fRollCentreHeightRear value="0.400000" />
<fCollisionDamageMult value="1.000000" />
<fWeaponDamageMult value="1.000000" />
<fDeformationDamageMult value="0.800000" />
<fEngineDamageMult value="1.500000" />
<fPetrolTankVolume value="65.000000" />
<fOilVolume value="5.000000" />
<fSeatOffsetDistX value="0.000000" />
<fSeatOffsetDistY value="0.000000" />
<fSeatOffsetDistZ value="0.000000" />
<nMonetaryValue value="30000" />
<strModelFlags>440010</strModelFlags>
<strHandlingFlags>20000</strHandlingFlags>
<strDamageFlags>0</strDamageFlags>
<AIHandling>AVERAGE</AIHandling>
<SubHandlingData>
<Item type="CCarHandlingData">
<fBackEndPopUpCarImpulseMult value="0.100000" />
<fBackEndPopUpBuildingImpulseMult value="0.030000" />
<fBackEndPopUpMaxDeltaSpeed value="0.600000" />
</Item>
<Item type="n**l" />
<Item type="n**l" />
</SubHandlingData>
</Item>



</HandlingData>
</CHandlingDataMgr>

First of all, let me say that since I cannot explain all the lines here one by one, acceleration, return improvement etc. I will mention them. Before I explain, let me tell you that if you restart the vehicle while the vehicle is removed and used while the handling setting is in use, the person driving the vehicle and most of the people on the server crash, so even if the vehicle you set the handling is not in use, it will not be a problem if the vehicle is outside while you are setting the handling, but restarting the vehicle is not a problem. If you throw it, it will cause a problem, so after setting, delete that vehicle with the dv command and then restart the vehicle.

Code:
<nInitialDriveGears value="6" />

This code allows you to adjust the gear of the vehicle. 6 is the place where you need to set it, you can adjust it as you want.

Code:
<fInitialDriveForce value="0.395000" />

This code allows you to adjust the speed of the vehicle, you need to adjust the place in the quotation marks, if you make this part as "0.395000", the vehicle will accelerate excessively, so do this part like "0.795000", you will understand better with trial and error.

Code:
<fBrakeForce value="1.900000" />

This code helps you to improve the brakes of the vehicle, this part will be "1.900000", if you do it this way, the brakes of the "0.900000" vehicle will get worse, but if you do it this way, it will improve "5.900000".

Code:

<fBrakeBiasFront value="0.650000" />

This code helps you to adjust the rear brakes of the vehicle, if you increase this code, the vehicle becomes a drift vehicle?

Code:
<fHandBrakeForce value="0.520000" />

This code allows you to adjust the handbrake of the vehicle, this part is "0.520000", if you do it this way, the handbrake of the vehicle "0.020000" will get worse, but if you do it this way, "3.520000" will improve.Code:

Code:
<fTractionCurveMax value="3.800000" />

<fTractionCurveMin value="3.050000" />

These two codes help you to adjust the turns of the vehicle, if you decrease the logic like brake adjustment, it will get worse if you increase it.

Code:
<fCollisionDamageMult value="1.000000" />

<fWeaponDamageMult value="1.000000" />

<fDeformationDamageMult value="0.800000" />

<fEngineDamageMult value="1.500000" />

These codes allow you to adjust the damage of the vehicle, if you increase it, the vehicle will not be damaged easily, but if you decrease it, it will be easier to take damage.

Thanks for looking at the post if you have more questions you can leave a comment


Download link and virus scan result of the script I used in these photos:
Download:

Hidden link for visitors, to see Log in or register now.

VT:

Hidden link for visitors, to see Log in or register now.