Security HUD
System Watchdog
×
Threads Scanned ⟳
-- / --
SYS. LOAD --%
AI SHIELD ACTIVE
Backdoors Found: 0
DMCA Policy
×

📋 DMCA Compliance

This platform and community fully complies with the Digital Millennium Copyright Act (DMCA) and international copyright laws. We take all copyright protection seriously.

🛡️ Copyright Protection

If you believe a posted item belongs to you or violates your copyright, you may file a DMCA takedown request through our official channels. Upon receiving a valid claim, the infringing content will be removed within 24 hours.

What's new
×
Fiveguard
justscripts

Script VehControl NUI Menu

vinofz

vinofz

Bronze Elite
Joined
Dec 2, 2022
Messages
7
Reaction score
3
Points
156
Location
Indonesia
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
thx
 

TerrenceJ

Member
Joined
Jul 19, 2021
Messages
2
Reaction score
0
Points
156
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
Hopefully the link is still available 2 years later.
 

Mazgow

Bronze Elite
Joined
Mar 8, 2021
Messages
10
Reaction score
4
Points
156
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
Fivem4You

Fivem4You

Gold Elite
Joined
Jul 14, 2022
Messages
31
Reaction score
4,667
Points
306
Location
romania
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
heló szia
 

xStatikCuh

Bronze Elite
Joined
Jun 19, 2021
Messages
32
Reaction score
3
Points
156
Location
Texas
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
...............
 

Ling_LIng

Gold Elite
Joined
Aug 27, 2021
Messages
96
Reaction score
36
Points
176
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
...top
 
EetutusVx

EetutusVx

Member
Joined
Jun 8, 2023
Messages
1
Reaction score
0
Points
146
Location
USA
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
very cool will try
 
scruffycloutX

scruffycloutX

Member
Joined
Oct 26, 2022
Messages
3
Reaction score
0
Points
156
Location
France
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
Bobiras2

Bobiras2

Member
Joined
Jun 5, 2023
Messages
3
Reaction score
1
Points
146
Location
Albania
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
le3ts seeee
 
Bobiras2

Bobiras2

Member
Joined
Jun 5, 2023
Messages
3
Reaction score
1
Points
146
Location
Albania
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
      lets
Click to expand...
lets seee
 
jampampins

jampampins

Member
Joined
Mar 20, 2023
Messages
1
Reaction score
0
Points
146
Location
ur moms house
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
very cool
 
arkkk

arkkk

Member
Joined
Mar 1, 2023
Messages
3
Reaction score
1
Points
146
Location
united states
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nice works good
 

JWS966

Member
Joined
Nov 27, 2022
Messages
1
Reaction score
0
Points
146
Location
71701
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
Looks very nice
 
You must log in or register to reply here.
Top