Security HUD
System Watchdog
×
Threads Scanned ⟳
-- / --
SYS. LOAD --%
AI SHIELD ACTIVE
Backdoors Found: 0
DMCA Policy
×

📋 DMCA Compliance

This platform and community fully complies with the Digital Millennium Copyright Act (DMCA) and international copyright laws. We take all copyright protection seriously.

🛡️ Copyright Protection

If you believe a posted item belongs to you or violates your copyright, you may file a DMCA takedown request through our official channels. Upon receiving a valid claim, the infringing content will be removed within 24 hours.

What's new
×
Fiveguard
justscripts

Script VehControl NUI Menu

TallBarr

TallBarr

Bronze Elite
Joined
Aug 17, 2022
Messages
9
Reaction score
2
Points
146
Location
Sweden
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nice
 

Nadavk7

Silver Elite
Joined
May 17, 2022
Messages
36
Reaction score
7
Points
166
Location
Israel
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nicee
 

oldmandan

Member
Joined
Aug 26, 2021
Messages
28
Reaction score
0
Points
166
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
batmayn3

batmayn3

Member
Joined
Nov 21, 2022
Messages
14
Reaction score
1
Points
166
Location
antartica
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
batmayn3

batmayn3

Member
Joined
Nov 21, 2022
Messages
14
Reaction score
1
Points
166
Location
antartica
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
dope!
 
Jotinskii_cl

Jotinskii_cl

Member
Joined
Nov 19, 2022
Messages
2
Reaction score
0
Points
146
Location
Chile
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

Sakanosss12

Bronze Elite
Joined
Aug 28, 2022
Messages
13
Reaction score
2
Points
156
Location
thai
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
.
 
HY TERA CHODUI

HY TERA CHODUI

Member
Joined
Dec 9, 2022
Messages
3
Reaction score
0
Points
156
Location
kuikota chawk midnapore
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
ok
 
Shark52

Shark52

Member
Joined
Dec 7, 2022
Messages
2
Reaction score
0
Points
156
Location
German
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
LAVIN22

LAVIN22

Gold Elite
Joined
Jul 8, 2022
Messages
31
Reaction score
30
Points
166
Location
ssd
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
EinfachEinKevin

EinfachEinKevin

Gold Elite
Joined
Aug 26, 2022
Messages
56
Reaction score
181
Points
256
Location
deutschland
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
props720

props720

Member
Joined
Oct 14, 2022
Messages
18
Reaction score
1
Points
166
Location
215 w 2nd ave yuma co 80759
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
props720

props720

Member
Joined
Oct 14, 2022
Messages
18
Reaction score
1
Points
166
Location
215 w 2nd ave yuma co 80759
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
Arabe1705

Arabe1705

Member
Joined
Dec 13, 2022
Messages
3
Reaction score
0
Points
156
Location
florida
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
gg
 
Arabe1705

Arabe1705

Member
Joined
Dec 13, 2022
Messages
3
Reaction score
0
Points
156
Location
florida
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
hh
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
hi
 

hugoloriis44

Member
Joined
Dec 17, 2022
Messages
2
Reaction score
0
Points
156
Location
Osman24ien
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nugiits
 
You must log in or register to reply here.
Top