Security HUD
System Watchdog
×
Threads Scanned ⟳
-- / --
SYS. LOAD --%
AI SHIELD ACTIVE
Backdoors Found: 0
DMCA Policy
×

📋 DMCA Compliance

This platform and community fully complies with the Digital Millennium Copyright Act (DMCA) and international copyright laws. We take all copyright protection seriously.

🛡️ Copyright Protection

If you believe a posted item belongs to you or violates your copyright, you may file a DMCA takedown request through our official channels. Upon receiving a valid claim, the infringing content will be removed within 24 hours.

What's new
×
Fiveguard
justscripts

Script VehControl NUI Menu

Hamza_Nasr

Hamza_Nasr

Member
Joined
Jul 14, 2022
Messages
7
Reaction score
0
Points
146
Location
Tunisie
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
SO NCE
 
Hamza_Nasr

Hamza_Nasr

Member
Joined
Jul 14, 2022
Messages
7
Reaction score
0
Points
146
Location
Tunisie
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
NICE
 

Aitch

Member
Joined
Jul 28, 2022
Messages
11
Reaction score
1
Points
166
Location
London
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
sick
 
Koroninis69

Koroninis69

Silver Elite
Joined
Jun 28, 2022
Messages
20
Reaction score
6
Points
156
Location
Skuodas
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

Replaceful

Silver Elite
Joined
Jul 16, 2021
Messages
28
Reaction score
7
Points
166
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nice
 
Niffekkk

Niffekkk

Member
Joined
Aug 8, 2022
Messages
1
Reaction score
0
Points
156
Location
Polska
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
degation

degation

Member
Joined
Apr 24, 2022
Messages
30
Reaction score
1
Points
156
Location
cezc
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

JustinHiggins

Member
Joined
Aug 11, 2022
Messages
5
Reaction score
0
Points
146
Location
United States
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
LFG
 

Fleetzz00

Bronze Elite
Joined
May 8, 2022
Messages
8
Reaction score
4
Points
156
Location
Belgium
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
WaterFoxStudios

WaterFoxStudios

Member
Joined
Aug 14, 2022
Messages
4
Reaction score
0
Points
146
Location
United States
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
Damn bro I hope this works, I have had many issues with these scripts
 
D4NDI83

D4NDI83

Member
Joined
Jan 24, 2022
Messages
11
Reaction score
0
Points
156
Location
Italia
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nice bruh
 

tekilla

Bronze Elite
Joined
Jul 7, 2022
Messages
7
Reaction score
2
Points
156
Location
algerie
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

easydomii

Bronze Elite
Joined
Oct 8, 2022
Messages
24
Reaction score
3
Points
156
Location
swiss
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
You must log in or register to reply here.
Top