Script okokChatV2 - QBCore and ESX

[potpot]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

where to download qbcore version? I can only access ESX

 

[xxUgnius]

n

A

 

[leventze]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

nice

 

[leventze]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

Can someone send me the QBCore version please?

 

[juanelpescader]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

 

[Diego77648]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

Download link?

 

[AllyaM]

How did you

I already solved it, how do I send messages we are staff they don't come out and I'm admin? please help

How did you solve it ? I have the same issue. I did started the default chat 1st.

 

[cheeks]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

wheres the qb version lol

 

[SkillKid00]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

This is okokChat, not okokChatV2

 

[Snyco]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

 

[Najiep12]

i hope this gonna work

 

[jackjack]

View attachment 6028

你好，我給你帶來了我轉換成QBCore的okokChatV2 ESX版本（該文件包含兩個版本）。

請務必閱讀 README.md

---

更新： 注意 [僅 QBCore 版本] - 我注意到 PM 命令不起作用，您需要將 server.lua中的第 824 行 編輯為 xTargetName = getName(xTarget)以解決問題。

---

更新：26/04/2022 - 12:20 [僅 QBCore 版本] - 所有在這一小時後下載腳本的人都將正常工作。
如果您之前下載 過，請按照上面的詳細說明進行操作， 在第一次更新中將server.lua中的938、1003 行更改 為xTargetName = getName(xTarget)

---

預覽：

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert 新下載

好的貢獻 -> 腳本 - okokChatV2 - QBCore 和 ESX

 

[LeoSmithSMACK]

nice

 

[Bytex]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

 

[cmmv]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

nice

 

[Zydo]

so dope

K

 

[JEPYGAMING]

View attachment 6028

Ciao, ti porto la versione okokChatV2 ESX convertita da me in QBCore (Il file contiene entrambe le versioni).

Assicurati di leggere il README.md

---

AGGIORNAMENTO : ATTENZIONE [Solo versione QBCore] - Ho notato che il comando PM non funziona, è necessario modificare la riga 824 in server.lua in xTargetName = getName(xTarget) per risolvere il problema.

---

AGGIORNAMENTO: 26/04/2022 - 12:20 [Solo versione QBCore] - Tutte le persone che scaricheranno lo script dopo quest'ora funzioneranno correttamente .
Se l'hai scaricato in precedenza, apporta quanto descritto sopra, nel primo aggiornamento e modifica anche le righe 938, 1003 in server.lua in xTargetName = getName(xTarget)

---

Anteprima :

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx converte nuovo download

Buon contributo -> Script - okokChatV2 - QBCore e ESX

Gazie

 

[drippos]

View attachment 6028

Dobrý deň, prinášam Vám verziu okokChatV2 ESX mnou konvertovanú na QBCore (Súbor obsahuje obe verzie).

Nezabudnite si prečítať README.md

---

AKTUALIZÁCIA : POZOR [Iba verzia QBCore] - Všimol som si, že príkaz PM nefunguje, musíte upraviť riadok 824 v server.lua na xTargetName = getName(xTarget), aby ste problém vyriešili.

---

AKTUALIZÁCIA: 26/04/2022 - 12:20 [Iba verzia QBCore] - Všetci ľudia, ktorí si stiahnu skript po tejto hodine, budú fungovať správne .
Ak steho už stiahli , urobte to, čo je podrobne uvedené vyššie, v prvej aktualizácii a tiež zmeňte riadky 938, 1003 v server.lua na xTargetName = getName(xTarget)

---

Ukážka :

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx konvertuje nové stiahnutie

Dobrý príspevok -> Skript - okokChatV2 - QBCore a ESX

wdwdwdwdwdwdwdwdwdwdwdwdwdwdwdwd

 

[proctomenejde]

View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md

---

UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

---

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)

---

Preview:

Hidden link for visitors, to see Log in or register now.

Hidden link for visitors, to see Log in or register now.

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX

the design of the chat doesn't work for me

 

[hassangetz]

zzbanshzzhzhzhzh