Security HUD
System Watchdog
×
Threads Scanned
-- / --
SYS. LOAD --%
AI SHIELD ACTIVE
DMCA Policy
×

📋 DMCA Compliance

This platform and community fully complies with the Digital Millennium Copyright Act (DMCA) and international copyright laws. We take all copyright protection seriously.

🛡️ Copyright Protection

If you believe a posted item belongs to you or violates your copyright, you may file a DMCA takedown request through our official channels. Upon receiving a valid claim, the infringing content will be removed within 24 hours.

What's new
×
Fiveguard

Script okokChatV2 - QBCore and ESX

DARZOXssdsds

Member
Joined
Dec 5, 2025
Messages
4
Reaction score
3
Points
86
Location
bordeaux
View attachment 6028

Bonjour, je vous propose la version ESX d'okokChatV2 convertie par mes soins pour QBCore (le fichier contient les deux versions).

Assurez-vous de lire le fichier README.md‼️


MISE À JOUR : ATTENTION [Version QBCore uniquement] - J'ai remarqué que la commande PM ne fonctionne pas, vous devez modifier la ligne 824 dans server.lua en xTargetName = getName(xTarget) pour résoudre le problème.

MISE À JOUR : 26/04/2022 - 12:20 [Version QBCore uniquement] - Toutes les personnes qui téléchargeront le script après cette heure pourront tout faire fonctionner correctement .
Si vousl' avez déjà téléchargé , effectuez les opérations détaillées ci-dessus lors de la première mise à jour et modifiez également les lignes 938 et 1003 du fichier server.lua en : xTargetName = getName(xTarget).


Aperçu :

@Ares esx convert nouveau téléchargement

Bonne contribution -> Script - okokChatV2 - QBCore et ESX
 

defnotmxds

Member
Joined
Dec 26, 2024
Messages
2
Reaction score
0
Points
146
Location
Singapore
View attachment 6028

Hello, I bring you the okokChatV2 ESX version converted by me to QBCore (The file contains both versions).

Make sure to read the README.md ‼️


UPDATE: ATTENTION [Only QBCore Version] - I notice that the PM command doesn´t work, you need to edit line 824 in server.lua to xTargetName = getName(xTarget) to fix the problem.

UPDATE: 26/04/2022 - 12:20 [Only QBCore Version] - All the people who download the script after this hour will have all working properly.
If you got downloaded it before, make what is detailed above, in the first update and also change the lines 938, 1003 in server.lua to xTargetName = getName(xTarget)


Preview:

@Ares esx convert new download

Good contribution -> Script - okokChatV2 - QBCore and ESX
 
Top