Security HUD
System Watchdog
×
Threads Scanned ⟳
-- / --
SYS. LOAD --%
AI SHIELD ACTIVE
Backdoors Found: 0
DMCA Policy
×

📋 DMCA Compliance

This platform and community fully complies with the Digital Millennium Copyright Act (DMCA) and international copyright laws. We take all copyright protection seriously.

🛡️ Copyright Protection

If you believe a posted item belongs to you or violates your copyright, you may file a DMCA takedown request through our official channels. Upon receiving a valid claim, the infringing content will be removed within 24 hours.

What's new
×
Fiveguard
justscripts

Script VehControl NUI Menu

nikola240508

Member
Joined
Dec 11, 2022
Messages
1
Reaction score
0
Points
156
Location
Tuzi
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
a
 
7gravity

7gravity

Member
Joined
Sep 18, 2021
Messages
1
Reaction score
0
Points
156
Location
france
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nicee
 
loskisss

loskisss

Member
Joined
Mar 3, 2022
Messages
7
Reaction score
0
Points
146
Location
Barcelona
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nnnnnnnnnnnnice
 
Fivem4You

Fivem4You

Gold Elite
Joined
Jul 14, 2022
Messages
31
Reaction score
4,667
Points
306
Location
romania
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
im need this
 
harick

harick

Silver Elite
Joined
Aug 22, 2022
Messages
44
Reaction score
12
Points
156
Location
poland
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nice
 

VRain67

Member
Joined
Nov 13, 2021
Messages
6
Reaction score
0
Points
146
Location
Missouri
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
Thank you, is this only esx?
 
bleble

bleble

Member
Joined
Nov 27, 2022
Messages
5
Reaction score
0
Points
146
Location
Slovakia
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

Klumzzy

Member
Joined
Jun 12, 2022
Messages
4
Reaction score
0
Points
156
Location
NY
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nice
 

javig405

Bronze Elite
Joined
Jul 9, 2022
Messages
19
Reaction score
3
Points
156
Location
Texas
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
.....
 
Corthiaa

Corthiaa

Member
Joined
May 25, 2022
Messages
4
Reaction score
0
Points
156
Location
Canada
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
ss
 
mr_saltyy

mr_saltyy

Member
Joined
Dec 19, 2022
Messages
9
Reaction score
0
Points
146
Location
Indonesia
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

H I T M A N

Gold Elite
Joined
Apr 22, 2022
Messages
39
Reaction score
32
Points
176
Location
USA
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
let check
 

MrTaylor92

Bronze Elite
Joined
Aug 12, 2021
Messages
17
Reaction score
2
Points
156
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
You must log in or register to reply here.
Top