Security HUD
System Watchdog
×
Threads Scanned ⟳
-- / --
SYS. LOAD --%
AI SHIELD ACTIVE
Backdoors Found: 0
DMCA Policy
×

📋 DMCA Compliance

This platform and community fully complies with the Digital Millennium Copyright Act (DMCA) and international copyright laws. We take all copyright protection seriously.

🛡️ Copyright Protection

If you believe a posted item belongs to you or violates your copyright, you may file a DMCA takedown request through our official channels. Upon receiving a valid claim, the infringing content will be removed within 24 hours.

What's new
×
Fiveguard
justscripts

Script VehControl NUI Menu

Rhaedda

Rhaedda

Silver Elite
Joined
Aug 12, 2021
Messages
63
Reaction score
13
Points
166
Location
Hungary
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 
midsmoke420

midsmoke420

Member
Joined
Feb 16, 2022
Messages
14
Reaction score
0
Points
166
Location
florida
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
ncuie
 
midsmoke420

midsmoke420

Member
Joined
Feb 16, 2022
Messages
14
Reaction score
0
Points
166
Location
florida
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
      yrd
Click to expand...
 

djawed311

Bronze Elite
Joined
Oct 17, 2021
Messages
14
Reaction score
54
Points
231
Location
algerien
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
best
 
donemckralj

donemckralj

Member
Joined
Nov 6, 2022
Messages
1
Reaction score
0
Points
156
Location
Srbija
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
1
 
props720

props720

Member
Joined
Oct 14, 2022
Messages
18
Reaction score
1
Points
166
Location
215 w 2nd ave yuma co 80759
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

bde

Member
Joined
May 25, 2021
Messages
7
Reaction score
0
Points
146
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

bde

Member
Joined
May 25, 2021
Messages
7
Reaction score
0
Points
146
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting phat​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

PockerFace

Gold Elite
Joined
Apr 30, 2021
Messages
171
Reaction score
54
Points
231
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
lllllll
 
Asuralsi

Asuralsi

Member
Joined
Jan 20, 2023
Messages
4
Reaction score
0
Points
146
Location
United Kingdom
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
Amazing. Hope this works.
 

TxcGamingX

Bronze Elite
Joined
Oct 18, 2021
Messages
20
Reaction score
2
Points
166
Location
caliifornia
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
nice
 
rt7k

rt7k

Member
Joined
Dec 11, 2022
Messages
6
Reaction score
0
Points
146
Location
Algeria
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
gggg
 

alexfred

Member
Joined
Apr 30, 2021
Messages
15
Reaction score
1
Points
156
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
good
 

qmjpepsi

Member
Joined
Dec 27, 2022
Messages
4
Reaction score
2
Points
156
Location
NY
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
 

cellovers

Bronze Elite
Joined
Apr 30, 2022
Messages
13
Reaction score
2
Points
156
Location
manado
ARaros said:
VehContol is a NUI vehicle control script, It is currently a standalone script that does not have any dependencies and is a drop in to any server.
Control

  • Hood
  • Trunk
  • Doors
  • Windows
  • Interior Light
  • Change Seats
  • Leave Engine Running on Exit
NUI Controls

  • Open - ]
  • Close - ESC
Commands

  • /engine - Start/Stop Vehicle Engine
  • /hood - Open/Close Hood
  • /trunk - Open/Close Trunk
  • /seat [1-4]- Move Seat
  • /door [1-4] - Open/Close Door
  • /window [1-4] - Roll Up/Down Window
  • /windowfront - Roll Up/Down Front Windows
  • /windowback - Roll Up/Down Back Windows
  • /windowall - Roll Up/Down All Windows
  • /vehcontrolclose - Close NUI (in F8 if stuck open)

Exporting​

Exporting and Events​

The following ways can be used to open the menu from another resource depending on how the resource is coded

Open menu from another resource with exports
WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Open menu from another resource with events

WARNING
Write all in one. Since there is distortion in the text, it was written separately, you write it together.

Config

UseCommands [true/false] - Allow the use of /commands
DisableSeatShuffle [true/false] - Allow auto-seat shuffle from passenger to driver
LeaveRunning [true/false] - Allow the engine to keep running on exit of the vehicle with a long F keypress

Download:
Hidden link for visitors, to see Log in or register now.


WARNING
You must change the folder after extraction from “vehcontrol-master” to “vehcontrol” or your NUI menu will not work when you push a button!



Hidden link for visitors, to see Log in or register now.








TODO
  • Nothing Currently

    Changelog

    v1.1.4
    • Added secondary way to call the menu using events
    • v1.1.3





    • Added Exports to call the menu from another resource
    • v1.1.2





    • Merged Pull request #2 by yhtrae, which added a fix for disabling the opening of the menu while in the ESC pause menu
    • Added ability to keep the engine running when you get out of the drivers seat
    • Add LeaveRunning [true/false] flag to config
    • v1.1.1





    • Fix Auto-Seat Shuffle
    • Add DisableSeatShuffle [true/false] flag to config
    • v1.1.0





    • Fixed seat switching (was unable to move to driver from every seat)
    • Added config.lua with settings
    • Added /engine command
    • Added /hood command
    • Added /trunk command
    • Added /door command
    • Added /seat command
    • Added /window command
    • Added /windowfront command
    • Added /windowback command
    • Added /windowall command
    • Added vehcontrolclose command (use in F8 if NUI stuck open)
    • Restructured code to be modular with NUI and Commands
    • v1.0.0





    • Initial Release

      Screenshots
      View attachment 650

      View attachment 651
Click to expand...
thx
 
You must log in or register to reply here.
Top