Jones9021
Member
Does anyone know how to integrate QBCore and FivePD. I know that it can be done with ESX, and I have seen other QBCore servers running FivePD but Have not found a single resource that tells me how to do the integration.
System Watchdog
Threads Scanned
-- / --
SYS. LOAD
--%
AI SHIELD
ACTIVE
DMCA Policy
📋 DMCA Compliance
This platform and community fully complies with the Digital Millennium Copyright Act (DMCA) and international copyright laws. We take all copyright protection seriously.
🛡️ Copyright Protection
If you believe a posted item belongs to you or violates your copyright, you may file a DMCA takedown request through our official channels. Upon receiving a valid claim, the infringing content will be removed within 24 hours.
Question QBCore and FivePD integration
Tatwaffe
Member
Step 1: Install FivePD
Download the latest version of FivePD from the FivePD official website and follow the installation instructions to install FivePD on your FiveM server.
Step 2: Install QBcore
Download the latest version of QBcore from the QBcore official website and follow the installation instructions to install QBcore on your FiveM server.
Step 3: Configuration of FivePD with QBcore
Open FivePD's configuration file and adjust the database settings to match QBcore's database settings. This allows FivePD to access the database used by QBcore.
Step 4 : Integration of FivePD with QBcore
In your QBcore resources file, create an entry for FivePD and add the FivePD folder as a dependency. This can usually be done in FiveM's server.cfg file or in a separate QBcore resource configuration file.
Step 5: Start FiveM with FivePD and QBcore
Start your FiveM server and make sure that both FivePD and QBcore are loaded as resources. Check the server console for error messages and make sure all resources are loading correctly.
It's important to note that the exact steps and configurations may vary depending on the specific versions of FivePD and QBcore you're using. It is highly recommended to read the official FivePD and QBcore documentation and follow the developers' instructions closely to ensure a successful integration.
Download the latest version of FivePD from the FivePD official website and follow the installation instructions to install FivePD on your FiveM server.
Step 2: Install QBcore
Download the latest version of QBcore from the QBcore official website and follow the installation instructions to install QBcore on your FiveM server.
Step 3: Configuration of FivePD with QBcore
Open FivePD's configuration file and adjust the database settings to match QBcore's database settings. This allows FivePD to access the database used by QBcore.
Step 4 : Integration of FivePD with QBcore
In your QBcore resources file, create an entry for FivePD and add the FivePD folder as a dependency. This can usually be done in FiveM's server.cfg file or in a separate QBcore resource configuration file.
Step 5: Start FiveM with FivePD and QBcore
Start your FiveM server and make sure that both FivePD and QBcore are loaded as resources. Check the server console for error messages and make sure all resources are loading correctly.
It's important to note that the exact steps and configurations may vary depending on the specific versions of FivePD and QBcore you're using. It is highly recommended to read the official FivePD and QBcore documentation and follow the developers' instructions closely to ensure a successful integration.
mfel2k
Member
Is there a chance of a more detailed instruction? I have qbcore installed on my server and there is no resource folder before the qbcore framework server folder. I think this provides a challenge as FivePD threw an error stating that access to the config.json file was denied, which is odd
bmcelvy09
Bronze Elite
any news on this? trying to do the same and i can only get it to work with one player at a time and if someone joins both get kicked or the one gets kicked and the player joining gets in. its very strange